Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aeware Manuals
  4. Keypad
  5. in.k450
  6. Quick reference card

Aeware in.k450 Quick Reference Card

Hide thumbs Also See for in.k450:

Advertisement

Quick Links

Download this manual
in.k450 keypads for in.xe spa systems
e Card
Spa Functions
in.k450
Compact full-function keypads
for in.xe spa systems
On/Off key
The Quick Reference Card provides a quick overview of your spa's main
Depending on the spa manu-
functions and the operations accessible with your digital control pad.
facturer, this key may have
one or a combination of the
This QRC depicts a generic overlay, custom versions may vary.
following functions: Standby
and/or On/Off and/or
Economy mode.
Quick Reference Card
Standby Mode: This mode
allows you to stop all outputs
and automatic functions with
the exception of the heat
request for 30 minutes.
When active, the display will
toggle between the "Sby"
Quick Reference
in.k450 keypads for in.x
in.k450
Compact full-funct
for in.xe spa system
The Quick Reference Card p
functions and the operation
This QRC depicts a generic
On/Off Mode: This mode
allows you to stop all outputs
including all automatic func-
tions such as fi lter cycle, heat
request and smart winter
mode purge for 30 minutes
to perform quick spa mainte-
When the
normal op
shows "O
Manual E
This mode
some ene
Pump 1/O

Advertisement

loading
Need help?

Need help?

Do you have a question about the in.k450 and is the answer not in the manual?

Questions and answers

Related Manuals for Aeware in.k450

Summary of Contents for Aeware in.k450

  • Page 1 Quick Reference Card Quick Reference in.k450 keypads for in.xe spa systems in.k450 keypads for in.x in.k450 Compact full-funct e Card for in.xe spa system xe spa systems The Quick Reference Card p functions and the operation This QRC depicts a generic Spa Functions in.k450...

  • Page 2: Spa Functions

    Spa Functions On/Off key Depending on the spa manu- facturer, this key may have one or a combination of the following functions: Standby and/or On/Off and/or Economy mode. • The fi rst mode activates/ deactivates via a short press on the key. •...
  • Page 3 Standby Mode: This mode allows you to stop all outputs and automatic functions with Standby Mode: This mode the exception of the heat allows you to stop all outputs request for 30 minutes. and automatic functions with When active, the display will the exception of the heat toggle between the “Sby”...
  • Page 4 On/Off Mode: This mode allows you to stop all outputs including all automatic func- On/Off Mode: This mode tions such as fi lter cycle, heat allows you to stop all outputs request and smart winter including all automatic func- mode purge for 30 minutes tions such as fi...
  • Page 5 When the system resumes its normal operation the display shows “On” for 3 seconds. When the system resumes its normal operation the display Manual Economy Mode: shows “On” for 3 seconds. This mode allows you to save some energy by regulating Manual Economy Mode: the water temperature 20°F This mode allows you to save...
  • Page 6 Pump 1/Off key Pump 1/Off key the “OFF” message, the clock Press Pump 1 key to turn Press Pump 1 key to turn and the water temperature. Pump 1 on at low speed. Press either, Pump 1, Pump Press a second time to turn Pump 1 on at low speed.
  • Page 7 he operations accessible with your digital control pad. the “OFF” message, the clock ts a generic overlay, custom versions may vary. and the water temperature. Press either, Pump 1, Pump 2, Blower or On/Off key to restart the system before the expiration of the 30 minutes delay.
  • Page 8 Pump 2 key Press Pump 2 key to turn Pump 2 on at low speed. Press a second time to turn pump to high speed (with a dual-speed pump*). A third time turns pump off. A built-in timer automatically turns pump off after 20 minutes, unless pump has been manually deactivated fi...
  • Page 9 Blower key Press Blower key to turn Blower on. Press a second time to turn Blower off. A built-in timer automatically turns blower off after 20 mi- nutes, unless blower has been manually deactivated fi rst. The “Blower” indicator lights up when blower is on.
  • Page 10 Light key Press Light key to turn light on. A second press turns light off. A built-in timer automatically turns light off after 2 hours, unless it has been manually deactivated fi rst. The “Light” indicator lights up when light is on.

  • Page 11: Up/Down Keys

    Up/Down keys Use Up or Down key to set desired water temperature. The temperature setting will be displayed for 2 seconds to confi rm your new selection. The "Set Point" icon indicates that the display shows the desired tempera- ture, NOT the current water temperature!

  • Page 12: Programming Steps

    Programming Steps Program menu Depending on the keypad confi guration, the program menu will be accessible via either the Program key (check mark) or the Light key. A long press of 5 seconds will allow you to enter the program menu.
  • Page 13 the parameters and use the Program or Light key to jump to the next parameter. The changes will be saved after the confi rmation of the last parameter only. If there is no key press for 10 seconds, the system will exit the program menu without saving the changes.

  • Page 14: Setting The Clock

    Setting the clock Enter the program menu by holding down the Filter key for 5 seconds. The display will show the current clock setting, the minutes will be on solid and the hours will fl ash. Depending on factory settings your system may be set to a 24-hour military notation or a regular 12-hour notation.
  • Page 15 Setting the hour: Use the Up or Down keys to adjust the hours (AM/PM). Press the Filter key to jump to the next parameter, the minutes. Setting the minutes: Use the Up or Down keys to adjust the minutes. Press the Filter key to jump to the next parameter, the fi...
  • Page 16 Programming the fi lter/ purge cycles Depending on system confi guration your spa will perform either a fi lter or a purge cycle. The fi lter cycle menu consists of the following parameters: the start time (FS), the duration (Fd) and the frequency (FF).
  • Page 17 A fi lter cycle consists of starting all the pumps and blower in high speed for 1 mi- nute (purge step) then, the pump associated with the fi lter will run in low speed for the remaining duration of the fi...
  • Page 18 Setting fi lter cycle start time The display will show FSxx, “xx” representing the starting hour of the fi lter cycle. Use the Up or Down key to adjust the hours. Use the Filter key to jump to the next param- eter, fi...
  • Page 19 Setting fi lter cycle duration The display will show Fdxx, “xx” representing the dura- tion in hour of the fi lter cycle. Use the Up or Down key to adjust the duration. Use the Filter key to jump to the next parameter, fi...
  • Page 20 Setting fi lter cycle frequency The display will show FFxx, “xx” representing the number of fi lter cycles per day. Use the Up or Down key to adjust the frequency. Use the Filter key to jump to the next parameter, economy mode (EP).
  • Page 21 Setting the purge cycle start time The display will show FSxx, “xx” representing the starting hour of the purge cycle. Use the Up or Down key to adjust the hours. Use the Filter key jump to the next parameter, purge frequency (FF).
  • Page 22 Setting purge cycle frequency The display will show FFxx, “xx” representing the number of purge cycles per day. Use the Up or Down key to adjust the frequency. Use the Filter key to jump to the next para- meter, economy mode (EP). The “Purge cycle”...

  • Page 23: Setting Economy Mode

    Setting economy mode This mode allows you to lower the temperature set point of the spa by 20 °F (11 °C) during a certain period of the day. The display will show EPx, “x” representing the state of the programmed economy (0 = disable, 1 = enable).
  • Page 24 Setting economy start time The display will show ESxx, “xx” representing the hour at which the economy mode will become active. Use the Up or Down key to adjust the hour. Use the Filter key to jump to the next parameter, economy duration (Ed).
  • Page 25 Setting economy duration The display will show Edxx, “xx” representing the duration in hour of the economy mode. Use the Up or Down key to adjust the hour. Use the Filter key to jump to the next parameter, temperature unit. 0 = no economy 24 = continuous economy...

  • Page 26: Setting Temperature Unit

    Setting temperature unit Water temperature can be displayed in either Fahrenheit (°F) or Celsius (°C). The dis- play will show F or C. Use the Up or Down key to change the setting. Use the Filter key to save all the parameters.

  • Page 27: Smart Winter Mode

    “xx” representing the number of purge cycles per day. Use the Up or Down key to adjust the frequency. Use the Filter key to jump to the next para- meter, economy mode (EP). The “Purge cycle” indi- cator lights up when purge is on.

  • Page 28: Water Temperature Regulation

    Water temperature regulation In a regulation cycle, the sys- tem fi rst generates water fl ow through the heater housing and the plumbing, in order to ensure accurate water temperature readings as well as avoiding heater activation in dry conditions. After veri- fying pump activation and taking a water temperature reading if required, the...
  • Page 29 Troubleshooting section Should an error occur, the display will show a wrench icon (on the left of the screen) and one of the following error messages will toggle with the clock and the water temperature. Codes d’erreur in.xe Description An internal hardware error has been detected in in.xe. Contact dealer or service supplier.