Red Hat NETWORK SATELLITE 5.3.0 Reference Manual page 99

System Groups —
then use the System Set Manager to perform actions on them simultaneously. It is possible
to select only those systems that are members of all of the selected groups, excluding those
systems that belong only to one or some of the selected groups. To do so, select them and
click the Work with Intersection button. To add all systems in all selected groups, select
them and click the Work with Union button. Each system will show up once, regardless of
the number of groups to which it belongs. Refer to
"
for details.
• Updates — Shows which type of Errata Alerts are applicable to the group or confirms
that it is up-to-date. Clicking on a group's status icon takes you to the Errata tab of
its System Group Details page. Refer to
"
for more information.
The status icons call for differing degrees of attention:
•
— All systems within group are up-to-date
•
— Critical Errata available, update strongly recommended
•
— Updates available and recommended
• Group Name — The name of the group as configured during its creation. The
name should be explicit enough to easily differentiate between it and other
groups. Clicking on the name of a group takes you to Details tab of its System
Group Details page. Refer to
"
for more information.
• Systems — Total number of systems contained by the group. Clicking on
the number takes you to the Systems tab of the System Group Details
page for the group. Refer to
"
for more information.
• Use in SSM — Clicking the Use Group button in this column loads the group from that row and
launches the System Set Manager immediately. Refer to
"
for more information.
Section 7.4.4, "System Set Manager —
Section 7.4.3.3, "System Group Details —
Section 7.4.3.3, "System Group Details —
Section 7.4.3.3, "System Group Details —
Section 7.4.4, "System Set Manager —
87