Download Print this page
Hamilton Beach 19910 Manual
Hamilton Beach 19910 Manual

Hamilton Beach 19910 Manual

Hide thumbs Also See for 19910:

Advertisement

Quick Links

Iron
Fer à repasser
Plancha
For Questions:
1.800.851.8900
For recipes, tips,
product information
and registration:
hamiltonbeach.com
Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and/or injury to persons, including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless
they are closely supervised and instructed concerning use
of the appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is
used by or near children. Children should be supervised to
ensure that they do not play with the appliance.
4. Only use an iron for its intended use.
5. To avoid the risk of electric shock, do not immerse the iron
in water or other liquids.
6. Always turn the iron to OFF ( ) before plugging or
unplugging the iron from the electrical outlet. To unplug,
grasp the plug and pull from the outlet. Never pull from the
power cord.
7. Do not let the cord touch hot surfaces. Let the iron cool
completely before putting the iron away. Coil the cord
loosely around the iron when storing.
8. Always disconnect the iron from the electrical outlet before
filling the iron with water, emptying the water from the iron,
and when the iron is not in use.
9. Do not operate the iron with a damaged cord or in the
event the iron has been dropped or damaged or there are
visible signs of damage or it is leaking. To avoid the risk
of electric shock, do not disassemble the iron. Supply
cord replacement and iron repairs must be conducted
by a qualified serviceman or the manufacturer. Incorrect
assembly might result in a risk of electric shock when the
iron is used after reassembly.
10. The iron must be used and rested on a stable surface.
11. When placing the iron on its stand, ensure that the surface
on which the stand is placed is stable.
12. Do not leave the iron unattended while the iron is
connected or on an ironing board.
13. Burns can occur from touching hot metal parts, hot water,
or steam. Use caution when you turn a steam iron upside
down—there might be hot water in the reservoir.
14. To avoid a circuit overload, do not operate an iron on the
same circuit with another high-wattage appliance.
Read before use.
Lire avant utilisation.
Lea antes de usar.
Pour des questions :
1.800.267.2826
Pour des recettes,
des conseils, des
renseignements
sur le produit et
l'enregistrement:
hamiltonbeach.ca
Para preguntas:
800 71 16 100
Para recetas, consejos,
información del
producto y registro:
hamiltonbeach.com.mx

Advertisement

loading
Need help?

Need help?

Do you have a question about the 19910 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hamilton Beach 19910

  • Page 1 Iron Fer à repasser Plancha Read before use. Lire avant utilisation. Lea antes de usar. For Questions: Pour des questions : Para preguntas: 1.800.851.8900 1.800.267.2826 800 71 16 100 For recipes, tips, Pour des recettes, Para recetas, consejos, product information des conseils, des información del and registration:...
  • Page 2 15. If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating.
  • Page 3 performance, allow 3–4 seconds between each setting of Steam Control Lever to • If dry ironing, make sure Steam Control Lever is on Dry Iron ( Iron won’t steam. • Ensure there is water in Water Reservoir. • Move Steam Control Lever to Steam ( ) position.