Updating The Configuration Files Manually - Red Hat NETWORK SATELLITE 5.2 - CLIENT Configuration Manual

Updating the Configuration Files Manually

/usr/bin/rhn_register --configure
You are presented with a dialog box offering basic settings that may be reconfigured. Under
Select a Red Hat Network server to use replace the default value with the fully qualified
domain name (FQDN) of the RHN Satellite Server or RHN Proxy Server, such as https://
your_proxy_or_sat.your_domain.com/XMLRPC. Retain the /XMLRPC at the end. Click OK
when finished.
Figure 2.2. Red Hat Network Registration Client GUI Configuration
If your version of rhn_register does not display the server field, and you cannot upgrade to a later
version, you may enter the domain name of your RHN Satellite Server or RHN Proxy Server directly
Section 2.2.3, "Updating the Configuration Files
into the rhn_register configuration file. Refer to
Manually"
for precise instructions.
2.2.3. Updating the Configuration Files Manually
As an alternative to the GUI interface described in the previous section, users may also reconfigure
the Red Hat Network Registration Client and the Red Hat Update Agent by editing the applications'
configuration files.
To configure Red Hat Update Agent on the client systems connecting to the RHN Proxy Server or
RHN Satellite Server, edit the values of the serverURL and noSSLServerURL settings in the /etc/
7