Updating The Configuration Files Manually - Red Hat NETWORK SATELLITE 5.1.0 - CLIENT Configuration Manual

Chapter 2. Client Applications
steps. As root, run the following command:
/usr/bin/rhn_register --configure
You are presented with a dialog box offering basic settings that may be reconfigured. Under
replace the default value with the fully qualified
Select a Red Hat Network server to use
domain name (FQDN) of the RHN Satellite Server or RHN Proxy Server, such as
. Retain the at the end.
https://your_proxy_or_sat.your_domain.com/XMLRPC /XMLRPC
Click OK when finished.
Figure 2.2. Red Hat Network Registration Client GUI Configuration
If your version of does not display the server field, and you cannot upgrade to a
rhn_register
later version, you may enter the domain name of your RHN Satellite Server or RHN Proxy
Server directly into the configuration file. Refer to Section 2.3, "Updating the
rhn_register
Configuration Files Manually" for precise instructions.

2.3. Updating the Configuration Files Manually

As an alternative to the GUI interface described in the previous section, users may also
8