Red Hat NETWORK SATELLITE 5.2 - CLIENT Configuration Manual page 37

echo "the exit below)"
echo
exit 1
# can be edited, but probably correct (unless created during initial
install):
# NOTE: ACTIVATION_KEYS *must* be used to bootstrap a client machine.
ACTIVATION_KEYS=insert_activation_key_here
ORG_GPG_KEY=insert_org_gpg_pub_key_here
# can be edited, but probably correct:
CLIENT_OVERRIDES=client-config-overrides.txt
HOSTNAME=your_rhn_server_host.example.com
ORG_CA_CERT=RHN-ORG-TRUSTED-SSL-CERT
ORG_CA_CERT_IS_RPM_YN=0
USING_SSL=1
USING_GPG=1
REGISTER_THIS_BOX=1
ALLOW_CONFIG_ACTIONS=0
ALLOW_REMOTE_COMMANDS=0
FULLY_UPDATE_THIS_BOX=1
#
#
-----------------------------------------------------------------------------
# DO NOT EDIT BEYOND THIS POINT
-----------------------------------------------
#
-----------------------------------------------------------------------------
#
# an idea from Erich Morisse (of Red Hat).
# use either wget *or* curl
# Also check to see if the version on the
# machine supports the insecure mode and format
# command accordingly.
if [ -x /usr/bin/wget ] ; then
output=`/usr/bin/wget --no-check-certificate 2>&1`
error=`echo $output | grep "unrecognized option"`
if [ -z "$error" ] ; then
FETCH="/usr/bin/wget -q -r -nd --no-check-certificate"
else
FETCH="/usr/bin/wget -q -r -nd"
fi
else
33