Sample Rhn Proxy Server Configuration File - Red Hat NETWORK PROXY SERVER 4.0 Installation Manual

Table of Contents

Advertisement

Sample RHN Proxy Server Configuration
File
The
/etc/rhn/rhn.conf
for you to establish key settings. Be warned, however, that errors inserted into this file may
cause Proxy failures. Make configuration changes with caution.
If you are also using an RHN Satellite Server, you should be particularly concerned with
the following parameters: traceback_mail and proxy.rhn_parent. Review the sample and its
comments (beginning with a hash mark #), for additional details.
Note
You may add the
0 to turn off SSL between the Proxy and the upstream server temporarily. Note that this
greatly compromises security. Return the setting to its default value of 1 to re-enable SSL,
or simply remove the line from the configuration file.
# Automatically generated RHN Management Proxy Server configuration file.
# -------------------------------------------------------------------------
# SSL CA certificate location
proxy.ca_chain = /usr/share/rhn/RHNS-CA-CERT
# Corporate HTTP proxy, format: corp_gateway.example.com:8080
proxy.http_proxy =
# Password for that corporate HTTP proxy
proxy.http_proxy_password =
# Username for that corporate HTTP proxy
proxy.http_proxy_username =
# Location of locally built, custom packages
proxy.pkg_dir = /var/spool/rhn-proxy
# Hostname of RHN Server or RHN Satellite
proxy.rhn_parent = rhn.redhat.com
# Destination of all tracebacks, etc.
traceback_mail = user0@domain.com, user1@domain.com
configuration file for the RHN Proxy Server provides a means
setting to
use_ssl
Appendix A.
for testing purposes only. Set its value to
rhn.conf

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NETWORK PROXY SERVER 4.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Rhn proxy server 4.0

Table of Contents