Sample Rhn Proxy Server Configuration File - Red Hat NETWORK PROXY SERVER 3.7 Installation Manual

Sample RHN Proxy Server Configuration File
The
/etc/rhn/rhn.conf
establish key settings. Be warned, however, that errors inserted into this file may cause Proxy failures.
So make configuration changes with caution.
You should be particularly concerned with the following parameters: traceback_mail and
proxy.rhn_parent, if you are also using an RHN Satellite Server. Review the sample and its
comments, beginning with a hash mark (#), for additional details.
Note
You may add the
off SSL between the Proxy and the upstream server temporarily. Note that this greatly compromises
security. Return the setting to its default value of 1 to re-enable SSL, or simply remove the line from
the configuration file.
# Automatically generated RHN Management Proxy Server configuration file.
# -------------------------------------------------------------------------
# SSL CA certificate location
proxy.ca_chain = /usr/share/rhn/RHNS-CA-CERT
# Corporate HTTP proxy, format: corp_gateway.example.com:8080
proxy.http_proxy =
# Password for that corporate HTTP proxy
proxy.http_proxy_password =
# Username for that corporate HTTP proxy
proxy.http_proxy_username =
# Location of locally built, custom packages
proxy.pkg_dir = /var/spool/rhn-proxy
# Hostname of RHN Server or RHN Satellite
proxy.rhn_parent = rhn.redhat.com
# Destination of all tracebacks, etc.
traceback_mail = user0@example.com, user1@example.com
configuration file for the RHN Proxy Server provides a means for you to
setting to
use_ssl rhn.conf
for testing purposes only. Set its value to 0 to turn
Appendix A.