Starting The Red Hat Network Registration Client - Red Hat NETWORK ENTERPRISE - USER REFERENCE GUIDE 2.2 User Reference Manual

74
Figure 7-1. Red Hat Network Registration Client Configuration
To start the command line version, use the command:
rhn_register --nox --configure
It has more configuration options than the graphical version.
You will be presented with a list of options and their current values:
0. enableProxyAuth
1. noSSLServerURL
2. oemInfoFile
3. enableProxy
4. networkSetup
5. httpProxy
6. proxyUser
7. serverURL
8. proxyPassword
9. debug
Enter number of item to edit
Enter the number of the item that you want to modify, and enter a new value for the option. When
you finish changing your configuration, press [Enter] to save your changes and exit. Press [q] and then
[Enter] to quit without saving your changes.
The most common options configured are
To enable a proxy server, change the value for
the name of the proxy server and port number in the format http://HOST:PORT. For example, to
use the proxy server http://squid.mysite.org on port 3128, you would change the value to
http://squid.mysite.org:3128.
If you require a proxy username and password, set
username/password authentication for the proxy, and set
appropriate username and password for the proxy.
Chapter 7. Red Hat Network Registration Client
No
http://www.rhns.redhat.com/XMLRPC
/etc/sysconfig/rhn/oeminfo
No
Yes
https://www.rhns.redhat.com/XMLRPC
No
return to exit, q to quit without saving
¢
enableProxy
enableProxy
and to enable a proxy server.
httpProxy
to Yes and the value of
enableProxyAuth
and
proxyUser proxyPassword
:
£
to
httpProxy
to Yes to enable
to the