Red Hat Network Registration Client; Configuring The Red Hat Network Registration Client - Red Hat NETWORK 4.0.5 Reference Manual

Red Hat Network Registration Client

Before you begin using Red Hat Network, you must create a username, password, and Sys-
tem Profile. The Red Hat Network Registration Client walks you through this process.
Warning
Only systems running Red Hat Enterprise Linux 2.1 need to use the Red Hat Network
Registration Client before starting the Red Hat Update Agent. Systems running Red
Hat Enterprise Linux 3 and later have this registration functionality built into the Red Hat
Update Agent. After registering your system, refer to Chapter 2 Red Hat Update Agent
for instructions on starting the Red Hat Update Agent.
5.1. Configuring the Red Hat Network Registration Client
To start the graphical interface for configuring the application to connect through an HTTP
proxy server, type the following command at a shell prompt:
rhn_register --configure
The window shown in Figure 5-1 appears.
Chapter 5.