Rhn Satellite Server::latency; Rhn Satellite Server::load; Rhn Satellite Server::probe Count - Red Hat NETWORK 3.7 Reference Manual

Appendix C. Probes
Field
Timeout (seconds)*
Critical Maximum Input Rate
Critical Maximum Output Rate
Table C-65. RHN Satellite Server::Interface Traffic settings
C.10.4. RHN Satellite Server::Latency
The RHN Satellite Server::Latency probe monitors the latency of probes on a Satellite and collects
the following metric:
Probe Latency Average — The lag in seconds between the time a probe becomes ready to run and
•
the time it is actually run. Under normal conditions, this will generally be less than a second. When
a Satellite is overloaded (because it has too many probes with respect to their average execution
time), the number goes up.
Field
Critical Maximum Probe Latency Average
Warning Maximum Probe Latency Average
Table C-66. RHN Satellite Server::Latency settings
C.10.5. RHN Satellite Server::Load
The RHN Satellite Server::Load probe monitors the CPU load on a Satellite and collects the following
metric:
Load — The load average on the CPU for a 1-, 5-, and 15-minute period.
•
Field
Critical Maximum 1-minute Average
Warning Maximum 1-minute Average
Critical Maximum 5-minute Average
Warning Maximum 5-minute Average
Critical Maximum 15-minute Average
Warning Maximum 15-minute Average
Table C-67. RHN Satellite Server::Load settings
C.10.6. RHN Satellite Server::Probe Count
The RHN Satellite Server::Probe Count probe monitors the number of probes on a Satellite and col-
lects the following metric:
Value
30
Value
Value
179