Network Services::imap Mail; Network Services::mail Transfer (Smtp) - Red Hat NETWORK 3.7 Reference Manual

164
This probe supports authentication. Provide a username and password in the appropriate fields to use
this feature.The optional Expect value is the string to be matched against after a successful connection
is made to the FTP server. If the expected string is not found, the probe will return a CRITICAL state.
Field
Expect
Username
Password
FTP Port*
Timeout*
Critical Maximum Remote Service Latency
Warning Maximum Remote Service Latency
Table C-38. Network Services::FTP settings
C.8.3. Network Services::IMAP Mail
The Network Services::IMAP Mail probe determines if it can connect to the IMAP 4 service on the
system. Specifying an optional port will override the default port 143. It collects the following metric:
Remote Service Latency — The time it takes in seconds for the IMAP server to answer a connection
•
request.
The required Expect value is the string to be matched against after a successful connection is made to
the IMAP server. If the expected string is not found, the probe will return a CRITICAL state.
Field
IMAP Port*
Expect*
Timeout*
Critical Maximum Remote Service Latency
Warning Maximum Remote Service Latency
Table C-39. Network Services::IMAP Mail settings
C.8.4. Network Services::Mail Transfer (SMTP)
The Network Services::Mail Transfer (SMTP) probe determines if it can connect to the SMTP port
on the system. Specifying an optional port number will override the default port 25. It collects the
following metric:
Remote Service Latency — The time it takes in seconds for the SMTP server to answer a connection
•
request.
Value
FTP
21
10
Value
143
OK
5
Appendix C. Probes