Table of Contents
Advertisement
Section 4.6:Syncronizing Your System Profile
4XFtOd04NMgWI63uqZc4zkRa+kwEZtmbz3tHSdRCCE+Y7YVP6IUf/w6YPQFQriWY
FiA6fD10eB+BlIUqIw80VgjsBKmCwvKkn4jg8kibXgj4/TzQSx77uYokw1EqQ2wk
OZoaEtcubsNMquuLCMWijYhGBBgRAgAGBQI36lRyAAoJECGRgM3bQqYOhyYAnj7h
VDY/FJAGqmtZpwVp9IlitW5tAJ4xQApr/jNFZCTksnI+4O1765F7tA==
=3AHZ
-----END PGP PUBLIC KEY BLOCK-----
2.
At the shell prompt, import the key with the following command:
gpg --import redhat2.asc
The resulting message tells you that the key was processed. To check that the key was added, type
gpg --list-keys. You will see the key you just downloaded from Red Hat, as well as your
own keys.
4.6 Syncronizing Your System Profile
If you configured the Red Hat Update Agent to install the latest packages automatically, then your
System Profile stored by Red Hat Network will be updated automatically also. However, if you only
download the latest RPM packages using the Red Hat Update Agent or the Red Hat Network Web
Application and upgrade or install the packages yourself, your System Profile will not be updated
automatically. If you remove packages, you need to update your RPM package list in your System
Profile.
To syncronize the RPM package list on your local system and on Red Hat Network run the command
up2date -p
After running this command, your System Profile on Red Hat Network as viewed from the Red Hat
Network Web Application will reflect the latest software versions installed on your system.
45
Advertisement
Table of Contents
