Red Hat NETWORK - USER REFERENCE GUIDE 1.3 User Reference Manual page 23

Table of Contents

Advertisement

Section 2.3:Registering a System Profile
23
2.3.2 Software System Profile
The software System Profile consists of a list of RPM packages for which you wish to receive notifi-
cations. The Red Hat Network Registration Client shows you a list of all RPM packages listed in
the RPM database on your system and then allows you to customize the list by deselecting packages.
Gathering RPM Database Information
Only those packages you choose during this part of the registration will be included in in your System
Profile, and you will only receive notifications about the packages in your System Profile. Thus, if
you use an older version of a package and deselect it from the list, it will not be replaced with a newer
version. This RPM list can be modifed later by running the Red Hat Network Registration Client
again, by using the Red Hat Network Web Application, or by using the Red Hat Update Agent. As
shown in Figure 2–9, Registration Wizard , querying the RPM database may take some time depending
on your system.
Figure 2–9 Registration Wizard
Once the RPM package list is built, the list will be displayed as shown in Figure 2–10, RPM Package
Information. Deselecting
Include RPM Packages installed on this system in my System Profile
will omit this information from your System Profile.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network 1.3

Table of Contents