Is41 Configuration Commands - Dialogic DSI SS7MD Programmer's Manual

7.12

IS41 Configuration Commands

The IS41 configuration commands are:
•
IS41_TRACE - IS41 Trace
7.12.1 IS41_TRACE – IS41 Trace
Synopsis
The IS41_TRACE command is used to configure IS41 to send trace messages to the trace module whenever
a specific message type is sent or received. See the IS41 Programmer's Manual for details.
Syntax
IS41_TRACE <op_evt_mask> <ip_evt_mask> <non_prim_mask>
Example
IS41_TRACE 0xf 0xf 0xff
Parameters
The IS41_TRACE command includes the following parameters:
•
<op_evt_mask>
Output event trace mask.
•
<ip_evt_mask>
Input event trace mask.
•
<non_prim_mask>
Non-primitive trace mask.
160
7 Configuration Command Reference