Dialogic DSI SS7MD Programmer's Manual page 104

6.7.3 SSD_MSG_STATE_IND – Board Status Indication
Synopsis
Message sent to the application on completion of the reset and download sequence or on detection of a
board status event.
Note: This message is not required when using the s7_mgt protocol configuration utility.
Format
type
id
src
dst
rsp_req
hclass
status
err_info
len
Offset
0
2
Description
This message is used to convey the status of a board reset operation (success of failure) to the user. The
status is indicated in the status field of the message header. The following table shows the possible
event_type values:
•
event_type
Parameter
The message parameters are:
•
board_type
Set to 16 for SS7MD.
•
failure_code
104
6 Message Reference
Field Name
SSD_MSG_STATE_IND (0x06a0)
board_id
SSD_module_ID (0x20)
mgmt_id for SSD
Used to request a confirmation
0
event_type (see below)
0
4
Size
2 board_type
2 failure_code
Value
0x60 Reset successful
0x62 Board failure
0x66 License validation failure
0x67 License appears corrupt
0x70 Message congestion toward board cleared
0x71 Message congestion toward board onset
Value
0x0000 undefined
0x00d7 Thermal failure
MESSAGE HEADER
Meaning
PARAMETER AREA
Name
Meaning
Meaning