TP-Link C400 Quick Start Manual
Hide thumbs
Also See for C400:
- Instructions manual (14 pages) ,
- Quick start manual ,
- Quick start manual (2 pages)
Related Manuals for TP-Link C400
Summary of Contents for TP-Link C400
- Page 1 Quick Start Guide Smart Wire-Free Security Camera System Tapo C400 ©2022 TP-Link 7106509765 REV1.0.0 *Images may differ from your actual product.
- Page 2 01 / Charge the Battery Method 1: Battery 5V USB Charger Charging: Solid amber Fully charged: Solid green Method 2: Battery Inside Camera *Check the battery status in the Tapo app after setup. 5V USB Charger Note: 1. Charge the battery before use. It will take about 5~6 hours. 2.
-
Page 3: Insert The Battery
02 / Insert the Battery 1. Twist anti-clockwise and then pull to remove the cover of the camera. Insert the battery. SYNC 2. Align the indicator line on the cover with the arrow icon on the camera body. Press and rotate clockwise to the lock position to replace the cover. - Page 4 03 / Set Up Hub and Camera 1. Get the Tapo app from the App Store or Google Play. 2. Follow the instructions in the Tapo app to set up your hub. 3. Follow the instructions in the Tapo app to set up your camera.
-
Page 5: Installation Options
04 / Installation Options Option 1. Set on a Table Install Rotate after installing Rotate to secure the bracket Option 2. Mount to the Wall Install Rotate after installing Rotate to secure the bracket... -
Page 6: Drill Holes
05 / Mount to the Wall 1. Drill Holes Stick the mounting template to the desired mounting place. Drill 3 holes according to the template. 2. Install the Bracket Insert three anchors into the holes and use the screws to affix the bracket over the anchors. - Page 7 Camera Appearance Front Lens Status LED Indicate the status of your came Light Sensor Microphone Motion Sensor...
- Page 8 Back SYNC SYNC/RESET Button era. While the camera is powered on: Press for 1 second: Pair with the hub Press and hold for about 5 seconds: Reset the camera...
- Page 9 Hub Appearance SYNC Button Press to pair with the camera, or silence the hub when it rings. RESET Use a pin to press and hold for about 5 seconds until the hub LED quickly blinks red to reset the hub. microSD Card Slot Insert a microSD card to record camera videos locally.
-
Page 10: Light Indications
Light Indications Hub Status LED Solid red Starting up Blinking red and green Ready for setup Solid amber Connected to router Solid green Connected to the cloud Blinking green slowly Pairing Blinking red quickly Hub resetting Blinking green quickly Hub updating Camera Status LED Solid Red Starting up... - Page 11 Safety Information • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended. • Do not use the device where wireless devices are not allowed. • Adapter shall be easily accessible. •...
- Page 12 Please use this product with care and operate at your own risk. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
- Page 13 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the C400 and is the answer not in the manual?
Questions and answers