Netscape DIRECTORY SERVER 7.0 - DSML GATEWAY Introduction Manual page 8

Configuring the DSML Gateway
NOTE
If the
headers, consisting of the user's full distinguished name and password. Any
operations done over the gateway will be done with proxy authorization and will
require a distinguished name with proxy rights. For more about proxy
authorization, refer to the Netscape Directory Server Administrator's Guide.
Stop the gateway.
1.
If the gateway is configured with the default parameters, this is done by
stopping the server:
Open the
2.
Edit the value of the
3.
allowing access.
For example, to change the default bindDN
uid=fred,ou=people,dc=example,dc=com
BindDN=anonymous
Edit the value of the
4.
password for authentication to the directory to keep access controls
functioning.
Change the line which reads
Restart the gateway.
5.
If the gateway is configured with the default parameters, this is done by
restarting the server:
Changing the Port
Edit the value of the
sure that this port number is not used by another application.
8 Netscape Directory Server DSML Gateway • October 2004
Everyone can read from the DSML gateway in its default
configuration. To restrict access further, set the
.
true
attribute value is set to
UseAuth
./stop-admin
dsmlgw.cfg
BindDN
to
BindPW
./start-admin
ServerPort
, the gateway requires standard HTTP
true
file in the
/clients/dsmlgw
attribute to reflect the user for whom you are
BindDN=uid=fred,ou=people,dc=example,dc=com
attribute. The password must be the same as the
to
BindPW= BindPW=foo
attribute to reflect the server you wish to use. Be
value to
UseAuth
directory.
to
anonymous
, change the line that reads
.
.