Configuring The Gateway - Netscape DIRECTORY SERVER 7.0 - DSML GATEWAY Introduction Manual

Parameter
UseAuth

Configuring the Gateway

The DSML gateway is configured when it is installed; no additonal configuration is
necessary. However, some clients may want to move a gateway or create multiple
gateway instances. This may be recommended for high traffic gateways that may
require a separate HTTP server.
Changing the Host and BindDN
Changing the Host
Stop the gateway.
1.
If the gateway is configured with the default parameters, this is done by
stopping the server:
Open the
2.
Edit the value of the
3.
For example, to change the default server
ds-internal.example.com
ServerHost=ds-internal.example.com
Restart the gateway.
4.
If the gateway is configured with the default parameters, this is done by
restarting the server:
Changing the Bind DN and Password
The default setting allows read-only access since the default bind DN is
Changing the bind DN will allow read-write access for the directory if you reset the
bind DN to a DN that has read-write permissions.
Description
true|false expression. If the expression is true, it
requires the user to authenticate in order to bind; if it is
false, it accepts the userID and password offered.
./stop-admin
file in the
dsmlgw.cfg
ServerHost
, edit
./start-admin
directory.
/clients/dsmlgw
attribute to reflect the server you wish to use.
localhost
ServerHost=localhost
.
Netscape Directory Server DSML Gateway
Configuring the DSML Gateway
Default
Setting
false
to
to
anonymous
.
7