Upgrading From Directory Server 6.X Versions; Before You Begin - Netscape DIRECTORY SERVER 6.2 Installation Manual

Upgrading From Directory Server 6.x Versions

serverRoot/shared/config/dbswitch.conf:directory default
ldap://configHostname:configPort/o%3DNetscapeRoot
serverRoot/slapd-serverID/config/dse.ldif:nsslapd-pluginarg0:
ldap://configHostname:configPort/o%3DnetscapeRoot
Turn off the pass through authentication (PTA) plug-in on Server2 by
3.
editing its
a.
b.
c.
Restart the Directory Server and Administration Server.
4.
Upgrading From Directory Server 6.x Versions
You can upgrade an instance of Directory Server 6.0x or 6.1x (for example, 6.0,
6.01, 6.02, 6.1, or 6.11) to Directory Server 6.2 by installing Directory Server 6.2
into the same installation directory in which your 6.0x or 6.1x Directory Server
instance is installed. These sections explain the upgrade process:
•

Before You Begin

• Upgrading
• After You Upgrade
Before You Begin
Before you begin the upgrade process, back up your entire 6.0x or 6.1x
Directory Server. For instructions, check backing up and exporting related topics
in Chapter 4, "Populating Directory Databases" of the Netscape Directory Server
Administrator's Guide.
106 Netscape Directory Server Installation Guide • December 2003
f file.
dse.ldi
In a text editor, open this file:
serverRoot/slapd-serverID/config/dse.ldif
Locate the entry for the PTA plug-in:
dn: cn=Pass Through Authentication,cn=plugins,cn=config
Change
nsslapd-pluginEnabled: on
.
off
to
nsslapd-pluginEnabled: