[Base] Installation Directives - Netscape DIRECTORY SERVER 6.2 Installation Manual

Using Silent Installation
Table 4-3
Directive
Port
ServerAdminID
ServerAdminPwd
ServerIpAddress

[Base] Installation Directives

There is only one [Base] installation directive and it allows you to determine
whether Netscape Console is installed. Table 4-4 lists the directive.
Table 4-4
Directive
Components
78 Netscape Directory Server Installation Guide • December 2003
[admin] Installation Directives (Continued)
Description
Specifies the port that the Administration Server will
use. Note that the Administration Server's host name
is given by the FullMachineName directive. For more
information on FullMachineName, see Table 4-1.
Specifies the administration ID that can be used to access
this Administration Server if the configuration
directory is not responding. The default is to use the
value specified by the ConfigDirectoryAdminID
directive. See "Defining Authentication Entities" on
page 15 for information on this directive.
Specifies the password for ServerAdminID.
Specifies the IP address that the Administration Server
will listen to. Use this directive if you are installing on
a multi-homed system and you do not want to use the
first IP address for your Administration Server.
[Base] Installation Directive
Description
Specifies the base components to be installed. The base
components are:
• base—Install the shared libraries used by all Server
Consoles. You must install this package if you are
also installing some other Netscape server.
• base-client—Install the Java run time
environment used by the Server Consoles.
• base-jre—Causes the Java run time environment
to be installed.
This directive is required if you are installing an
Netscape server (versus, for example, just Netscape
Console). You must install both packages when you are
installing an Netscape server.