Parameters for the Configuration Function
Defined Constant
SLAPI_PLUGIN_VERSION_01
SLAPI_PLUGIN_VERSION_02
SLAPI_PLUGIN_VERSION_03
Parameters for the Configuration Function
The following table lists the parameters in the parameter block passed to the
database configuration function. If you are writing a pre-operation, database, or
post-operation configuration function, you can get these values by calling the
slapi_pblock_get()
Parameter ID
SLAPI_CONFIG_FILENAME
See Chapter 3, "Configuring Plug-Ins" for more information.
Parameters for the Bind Function
The following table lists the parameters in the parameter block passed to the
database bind function. If you are writing a pre-operation, database, or
post-operation bind function, you can get these values by calling the
slapi_pblock_get()
Parameter ID
SLAPI_BIND_TARGET
504
Netscape Directory Server Plug-In Programmer's Guide • Version 6.02 • May 2002
Description
Version 1 of the plug-in interface, which is
supported by the Directory Server 3.x and
subsequent releases (including 4.0)
Version 2 of the plug-in interface, which is
supported by the Directory Server 4.x release
but not by previous releases
Version 3 of the plug-in interface, which is
supported by the Directory Server 6.02 release,
but not by previous releases.
function.
Data Type
char *
function.
Data Type
char *
Description
Name of the configuration file that is
being read (for example, dse.ldif)
Description
DN of the entry to bind as.