Netscape DIRECTORY SERVER 6.1 Installation Manual page 95

On your Directory Server 6.0x host machine, log in as
1.
Stop the server.
2.
# serverRoot/slapd-serverID/stop-server
Create a new directory, for example:
3.
# mkdir ds61
# cd ds61
Download the Directory Server 6.1 product binaries file to the directory you
4.
created.
Unpack the product binaries file using the following command:
5.
# gunzip -dc filename.tar.gz | tar -xvof -
where filename corresponds to the product binaries that you want to unpack.
In the list of files, locate the
6.
Run the program by issuing the following command (from the
7.
setup
installation directory):
./setup
The program asks if you would like to proceed with the setup.
setup
Press Enter to respond with the default (the default for this prompt is Yes) or
8.
press if you would like to exit the
n
(If you want to log in as
need to exit the
setup
Next, the program asks you if you agree to the license terms. Press
9.
setup
agree with the license terms.
When you are asked what you would like to install, press Enter to select the
10.
default, Netscape Servers.
When you are asked what type of installation you would like to perform, press
11.
Enter to select the default, Typical Installation.
When prompted to enter the server root (or the installation directory), enter the
12.
full path to the location where your Directory Server 6.0x is installed.
By default, the
setup
/usr/netscape/servers
If your 6.0x Directory Server is installed in a different path, be sure to select
that path. Once you supply the correct path, press Enter.
program.
setup
program.
setup
or superuser (use the
root
program.)
program provides the following path:
Chapter 6 Migrating and Upgrading From Previous Versions
Upgrading From Directory Server 6.0x Versions
or superuser (su).
root
command), you will
su
to
y
95