Netscape DIRECTORY SERVER 6.02 Installation Manual page 36

Using Typical Installation
When you are asked what type of installation you would like to perform, press
9.
Enter to select the default, Typical Installation.
For server root, enter a full path to the location where you want to install your
10.
server.
The location that you enter must be some directory other than the directory
from which you are running setup. Also, the name of the directory where you
install files must not contain any space characters. If the directory that you
specify does not exist, setup creates it for you.
By default, the setup program provides the following path:
/usr/netscape/servers
If you want to install the software into this directory tree, press Enter;
otherwise, supply your own path.
For the Server Products Core Components, Directory Suite, Administration
11.
Services, nsPerl, and PerLDAP, press Enter to select the default (all
components).
Press Enter to select all of the Server Products Core Components.
12.
Press Enter to select all the Directory Suite components.
13.
Press Enter to select all of the Administration Services components (Netscape
14.
Administration Server and the Administration Server Console).
Press Enter to install nsPerl.
15.
Press Enter to install PerLDAP.
16.
For the hostname, enter a fully qualified hostname or select the default (which
17.
is the local host).
CAUTION
36 Netscape Directory Server Installation Guide • May 2002
Note that the default hostname may be incorrect if the installer cannot locate
a DNS name in your system. For example, you might not have a DNS name
if your system uses NIS.
The hostname must be a fully qualified host and domain name. If the default
hostname is not a fully qualified host and domain name, installation will
fail. Refer to "Common Installation Problems," on page 75 for more
information about entering a fully qualified domain name.