cn=encryption
Encryption related attributes are stored under the
entry. The
cn=encryption,cn=config
nsslapdEncryptionConfig
taken into account by the server this object class (in addition to the
must be present in the entry. Encryption configuration attributes are presented in
this section.
nssslsessiontimeout
Specifies the lifetime duration of an SSL session for both SSLv2 and SSLv3. The
minimum timeout value is 5 seconds and if you enter a value below this, then it is
automatically replaced by 5 seconds. Values outside the valid ranges are replaced
by the default value of 100 seconds (SSLv2).
Entry DN
cn=encryption,cn=config
Valid Range
SSLv2 5 seconds to 100 seconds
SSLv3 5 seconds to 24 hours
0 which stands for 100 seconds in you are running SSLv2 and 24 hours if
Default Value
you are running SSLv3
Integer
Syntax
Example
nssslsessiontimeout: 5
nssslclientauth
Specifies, or not as the case may be, client authentication using SSL.
Entry DN
cn=encryption,cn=config
Valid Range
off | allowed | required
Default Value
allowed
DirectoryString
Syntax
Example
nssslclientauth: allowed
entry is an instance of the
object class. For encryption related attributes to be
Chapter 2
Core Server Configuration Attributes Reference
cn=encryption,cn=config
top
Core Server Configuration Reference
object class)
81
Need help?
Do you have a question about the NETSCAPE DIRECTORY SERVER 6.01 and is the answer not in the manual?