Core Server Configuration Attributes Reference
nsslapd-auditlog-maxlogsize (Audit Log Maximum Log Size)
Specifies the maximum audit log size in megabytes. When this value is reached, the
audit log is rotated. That is, the server starts writing log information to a new log
file. If you set
attribute.
When setting a maximum log size, consider the total number of log files that can be
created due to log file rotation. Also remember that there are 3 different log files
(access log, audit log, and error log) maintained by the Directory Server, each of
which will consume disk space. Compare these considerations to the total amount
of disk space that you want to be used by the audit log.
Entry DN
Valid Range
Default Value
Syntax
Example
nsslapd-auditlog-maxlogsperdir (Audit Log Maximum Number of Log
Files)
Specifies the total number of audit logs that can be contained in the directory
where the audit log is stored. If you are using log file rotation, then each time the
audit log is rotated, a new log file is created. When the number of files contained in
the audit log directory exceeds the value stored on this attribute, then the oldest
version of the log file is deleted. The default is 1 log. If you accept this default, the
server will not rotate the log and it will grow indefinitely.
If the value for this attribute is higher than 1, then you need to check the
nsslapd-auditlog-logrotationtime
rotation is specified. If the
value of -1 then there is no log rotation. See "nsslapd-auditlog-logrotationtime
(Audit Log Rotation Time)" on page 45 for more information.
Entry DN
Valid range
Default value
46
Netscape Directory Server Configuration, Command, and File Reference • January 2002
nsslapd-auditlog-maxlogsperdir
cn=config
-1 | 1 to the maximum 32 bit integer value (2147483647) where a value of
-1 means the log file is unlimited in size.
100
Integer
nsslapd-auditlog-maxlogsize: 50
nsslapd-auditlog-logrotationtime
cn=config
1 to the maximum 32 bit integer value (2147483647)
1
to 1, the server ignores this
attribute to establish whether or not log
attribute has a
Need help?
Do you have a question about the NETSCAPE DIRECTORY SERVER 6.01 and is the answer not in the manual?