Red Hat LVM ADMINISTRATOR FOR RHEL 4.5 Administrator's Manual page 62

Chapter 4. LVM Administration with CLI Commands
17.09G
17.14G
The pvs Command
Table 4.1, "pvs Display Fields"
field name as it appears in the header display and a description of the field.
Argument Header
DevSize
dev_size
1st PE
pe_start
Attr
pv_attr
Fmt
pv_fmt
PFree
pv_free
PV
pv_name
Alloc
pv_pe_alloc_count
PE
pv_pe_count
SSize
pvseg_size
Start
pvseg_start
PSize
pv_size
PV Tags
pv_tags
Used
pv_used
PV UUID
pv_uuid
Table 4.1. pvs Display Fields
The command displays the following fields by default:
pvs
, . The display is sorted by
pv_size pv_free
# pvs
PV VG
/dev/sdb1 new_vg lvm2 a-
/dev/sdc1 new_vg lvm2 a-
/dev/sdd1 new_vg lvm2 a-
Using the argument with the
-v
, .
dev_size pv_uuid
50
lists the display arguments of the
Description
The size of the underlying device on which the physical
volume was created
Offset to the start of the first physical extent in the underlying
device
Status of the physical volume: (a)llocatable or e(x)ported.
The metadata format of the physical volume (
The free space remaining on the physical volume
The physical volume name
Number of used physical extents
Number of physical extents
The segment size of the physical volume
The starting physical extent of the physical volume segment
The size of the physical volume
LVM tags attached to the physical volume
The amount of space currently used on the physical volume
The UUID of the physical volume
pv_name
Fmt Attr PSize PFree
17.14G 17.14G
17.14G 17.09G
17.14G 17.13G
command adds the following fields to the default display:
pvs
command, along with the
pvs
,
pv_name vg_name
.
or )
lvm2 lvm1
, , ,
pv_fmt pv_attr