Advertisement
Advertisement
Table of Contents
Related Manuals for oticon BTE PP
Summary of Contents for oticon BTE PP
- Page 1 Instructions for use Part 1 Oticon Engage BTE PP / BTE...
- Page 2 Your hearing aid and earpiece With sound hook and mould What it is and does There are two different attachments and several different earpieces available Microphone openings for the hearing aid. Sound in Sound hook With sound hook and mould Push button Tube Mute, change...
- Page 3 Turn the hearing aid on and The battery drawer is also used to switch the hearing aid on and off. To save battery life, make sure your hearing aid is switched off when you are not wearing it. If you wish to return to the standard settings of the hearing aid, simply open and close the battery drawer (quick reset).
-
Page 4: Identify Left And Right Hearing Aid
Identify left and right hearing aid It is important to distinguish between the left and the right hearing aid as they may be programmed differently. You can find left/right colour indica- tors in the battery drawer. Indicators can also be found on Micro moulds (optional) A BLUE indicator marks the LEFT... -
Page 5: How To Replace The Battery (Size 13)
How to replace the battery (size 13) 1. Remove Fully open the battery drawer. Remove the battery. 2. Uncover Remove the sticky label from the + side of the new battery. Tip: Wait 2 minutes so that the battery can draw air, to ensure optimal functioning. -
Page 6: Put On The Hearing Aid With Mould
Put on the hearing aid with mould Read the following pages if you have a hearing aid with a sound hook and mould. The mould is customised for you and fits your ear shape. The moulds are unique for the left or the right ear. Step 1 Gently pull your ear outwards and press the... - Page 7 Put on hearing aid with thin tube Step 1 Place the hearing aid behind your ear. The thin tube should only be used with an attached earpiece. Use only parts designed for your hearing aid. Step 2 Hold the bend of the tube between your thumb and index finger.
-
Page 8: Flight Mode
Flight mode When flight mode is activated, Bluetooth® is turned off. The hearing aid will still be working. Pressing the push button on one hearning aid will activate flight mode on both hearing aids. Optional LED The LED will blink green, red, red a few times. - Page 9 Change Change program volume Your hearing aid can have up to The push button allows you to adjust 4 different programs. These are the volume. You will hear a click when programmed by your hearing care you turn the volume up or down. professional.
-
Page 10: Important Notice
Mute Use the mute function if you need to silence the hearing aid. The mute function only mutes the microphone(s) on the hearing aid. Optional LED Green and red blinks, continuously repeated, to indicate mute. Apply a long press (4 seconds) to either end of the button to mute the hearing aid. -
Page 11: Other Options
Other options Telecoil helps you hear better when using a telephone with a built in loop or when you are in buildings with teleloop systems such as theatres, churches or lecture rooms. This symbol or a similar sign is shown wherever a teleloop has been installed. - Page 12 Tamper-resistant battery drawer To keep the battery out of reach of infants, small children, and people with learning difficulties, a tamper-resistant battery drawer should be used. To lock the battery Tool to unlock the Unlock the battery drawer battery drawer drawer Close the battery door Use this small tool...
-
Page 13: Sound And Led Indications
Sound and LED indications Different sound and LED light indications help to show the hearing aid status. The different setting options are listed on the following pages. Your hearing care professional can set sound and LED indications to match your preferences. Your individual hearing aid settings To be filled out by your hearing care...
Need help?
Do you have a question about the BTE PP and is the answer not in the manual?
Questions and answers