Plantronics Voyager Legend CS Quick Start Manual

Voyager Legend
Bluetooth
Designed in Santa Cruz, California
QUICK START GUIDE
Answer a call, choose:
• Put on the headset to answer call, or
• Tap the Call button
• Say "answer" after call is announced.
(Available only with your mobile
phone)
End a call
Tap the Call button
call.
Voice dial (mobile phone feature)
Press the Call button
seconds, wait for phone prompt and
then tell the phone to dial the name
of a stored contact.
1 Call status
• Idle = unlit
• Incoming call = fast blue flash
• On call = solid blue
• Call (headset mic) muted = slow blue
flash
2 Power LED
• Power off = unlit
• Powered = solid blue
• In pairing mode = red/blue flashing
• Pairing successful = solid blue
89650-05 (07.13)
headset system
®
or
to end current
for 2
1
2
CS
™
voice
Mute the microphone during a call
Tap the Mute button . You will hear
"mute on" confirmation. An alert
is repeated every 15 minutes as a
reminder. Tap the Mute button again
to open the microphone and hear
"mute off" confirmation.
Adjust the volume
Toggle the Volume button
or down (–) during a call or while
streaming audio.
3
3 Headset battery LED (when docked)
• Full battery, charging stopped = solid
blue
• High, charging = 3 blue flashes every
10 seconds
• Medium, charging = 2 blue flashes
every 10 seconds
• Low, charging = 2 red flashes every10
seconds
• Critical, charging = 3 red flashes
every 10 seconds
up (+)