Related Manuals for Roberts iStream 3
Summary of Contents for Roberts iStream 3
- Page 1 3 Smart Radio with Bluetooth, USB and Streaming Services and remote control from iPhone and Android using UNDOK Please read this guide, safety/warranty and streaming leaflets before use...
-
Page 2: What Is In The Box
DAB/DAB+ (BAND III): 5A-13F DC In: 12V 1.5A USB Output: 5V Battery: 6x 1.5V AA READ SAFETY GUIDE Roberts Radio Ltd, Glen Dimplex Europe Ltd, Stoney Lane, Whiston, Airport Road, Cloghran, Line Prescot, L35 2XW, UK Co. Dublin, K67 VE08, Ireland Designed &... - Page 3 STEP 1 - C o nne c t t o t he ma i n STEP 1 - C onne c t to the ma i ns & s e tu p y o u r s m a rt r a dio E - Connect to your network Before you can use your smart radio you must have the following: Before you can use your smart radio you must have the following:...
- Page 4 E - Connect to your network To listen to internet radio or to stream music from your computer, your radio must first be connected to your network. Choose ‘YES’ to keep the radio connected to the network when Network settings in Standby.
- Page 5 DAB - Carefully, extend the telescopic aerial. A scan of the Band III DAB channels that it is ‘discoverable’. On your smart device select ‘iStream 3’. will be carried out. Rotate the Tuning control to access the full station list. Press the Once the connection is established the indicator will remain Tuning control to select the highlighted radio station.
-
Page 6: Other Information
Line out socket 3.5mm dia. stereo iStream 3 Aerial System WiFi Built-in antenna, DAB/FM Telescopic aerial Plug the mains adaptor into your radio and then plug the adaptor into the mains. Bluetooth standards A2DP, AVRCP, Bluetooth codecs supported SBC and AAC The battery indicator will flash green indicating the batteries are charging. -
Page 7: Specifications
Note: You should never attempt to recharge alkaline batteries in the radio. Attempted recharging of alkaline batteries can be dangerous. • Important: when using rechargeable batteries the battery switch must be placed in the NiMH position. Batteries will only be charged when the radio is switched off and connected to the AC adaptor. -
Page 8: Circuit Features
The name plate is located underneath the radio. The company reserves the right to amend the specification without notice. Designed & Engineered in the UK Made in China ROBERTS RADIO LIMITED www.robertsradio.com Issue 3 © 2021 Roberts Radio Limited 2021-06-14...
Need help?
Do you have a question about the iStream 3 and is the answer not in the manual?
Questions and answers