Table of Contents
Advertisement
154
C.4. LOCK_GULM, SLM External
This example sets up a cluster with three nodes and two GFS file systems. It requires three nodes for
the GFS cluster and an additional (external) node to run the LOCK_GULM server.
This section provides the following information about the example:
Section C.4.1 Key Characteristics
•
Section C.4.2 Kernel Modules Loaded
•
Section C.4.3 Setup Process
•
C.4.1. Key Characteristics
This example configuration has the following key characteristics:
Fencing device — An APC MasterSwitch (single-switch configuration). Refer to Table C-11 for
•
switch information.
Number of GFS nodes — 3. Refer to Table C-12 for node information.
•
Number of lock server nodes — 1. The lock server is run on one of the GFS nodes (embedded).
•
Refer to Table C-13 for node information.
Locking protocol — LOCK_GULM. The LOCK_GULM server is run on the node that is desig-
•
nated as a lock server node.
Number of shared storage devices — 2. Refer to Table C-14 for storage device information.
•
Number of file systems — 2.
•
File system names —
•
File system mounting — Each GFS node mounts the two file systems.
•
Cluster name —
•
alpha
Host Name
apc
Table C-11. APC MasterSwitch Information
Host Name
n01
n02
n03
Table C-12. GFS Node Information
Host Name
lcksrv
Table C-13. Lock Server Node Information
and
.
gfs01
gfs02
.
IP Address
10.0.1.10
IP Address
10.0.1.1
10.0.1.2
10.0.1.3
IP Address
10.0.1.4
Appendix C. Basic GFS Examples
Login Name
apc
APC Port Number
1
2
3
APC Port Number
4
Password
apc
Advertisement
Table of Contents
