Red Hat GFS 6.0 Administrator's Manual page 127

Chapter 9. Managing GFS
Note
The GFS kernel modules must be loaded prior to performing these steps. Refer to
Section 3.2.2 Loading the GFS Kernel Modules for more information.
1. At each node, activate pools. Refer to Section 5.6 Activating/Deactivating a Pool Volume for
more information.
Command usage:
2. At each node, start the CCS daemon, specifying the CCA device on at the command line. Refer
to Section 7.2 Starting CCS in the Cluster for more information.
Command usage:
3. Start the LOCK_GULM servers. At each lock server node, start
Section 8.2.3 Starting LOCK_GULM Servers for more information.
Command usage:
4. At each node, mount the GFS file systems. Refer to Section 9.2 Mounting a File System for
more information.
Command usage:
pool_assemble
ccsd -d CCADevice
lock_gulmd
mount -t gfs BlockDevice MountPoint
113
. Refer to
lock_gulmd