Pool_Info - Red Hat GFS 5.2.1 Administrator's Manual

Chapter 5. Using the Pool Volume Manager
Flag
-V
-v
Table 5-2.
pool_tool
5.2.2.
pool_assemble
The
pool_assemble
Table 5-4). One or more pool names can be specified on the command line, indicating the pools to be
activated or deactivated. If no pools are specified on the command line, all pools will be acted upon.
Flag
-a
-r
Table 5-3.
pool_assemble
Flag
-D
-h
-q
-V
-v
Table 5-4.
pool_assemble
5.2.3.

pool_info

The command scans disks directly and displays information about activated pools in a
pool_info
system; that is, pools that have been assembled with the
5-5 and Table 5-6). Information about pools that are present but not assembled is excluded from the
information displayed with a
command line to select information about specific pools. If no pool name is specified, information on
all pools is returned.
Flag
-c
-i
Option
Display command version information, then exit.
Verbose operation.
Command Options
command activates and deactivates pools on a system (refer to Table 5-3 and
Function
Activate pool(s)
Deactivate pool(s)
Command Functions
Option
Enable debugging output.
Help. Show usage information.
Be quiet. Do not display output from the command.
Display command version information, then exit.
Verbose operation.
Command Options
pool_info
Function
Clear statistics
Display information
Section/Page Reference
Section 5.6 Activating/Deactivating a Pool
Volume
Section 5.6 Activating/Deactivating a Pool
Volume
pool_assemble
command. One or more pool names can be specified on the
Section/Page Reference
Section 5.13 Using Pool Volume Statistics
Section 5.12 Displaying Pool Volume
Information
command (refer to Table
25