Red Hat GFS 5.2.1 Administrator's Manual page 103

Chapter 9. Managing GFS
9.4.2. Displaying Quota Limits and Usage
Quota limits and current usage can be displayed for a specific user or group using the
command. The entire contents of the quota file can also be displayed using the
get
command, in which case all IDs with a non-zero hard limit, warn limit, or value are listed.
list
9.4.2.1. Usage
Displaying Quota Limits for a User
gfs_quota get -u User -f MountPoint
Displaying Quota Limits for a Group
gfs_quota get -g Group -f MountPoint
Displaying Entire Quota File
gfs_quota list -f MountPoint
User
A user ID to display information about a specific user. It can be either a user name from the
password file or the UID number.
Group
A group ID to display information about a specific group. It can be either a group name from the
group file or the GID number.
MountPoint
Specifies the GFS file system to which the actions apply.
9.4.2.2. Command Output
GFS quota information from the
user User: limit:LimitSize warn:WarnSize value:Value
group Group: limit:LimitSize warn:WarnSize value:Value
The LimitSize, WarnSize, and Value numbers (values) are in units of megabytes by default.
Adding the , , or
-k -s
system blocks, respectively.
User
A user name or ID to which the data is associated.
Group
A group name or ID to which the data is associated.
gfs_quota
flags to the command line change the units to kilobytes, sectors, or file
-b
command is displayed as follows:
89
gfs_quota
gfs_quota