The Virtual Server Subsection - Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION Manual

Chapter 4. Configuring the LVS Routers with Piranha Configuration Tool
Figure 4.5. The VIRTUAL SERVERS Panel
Each server displayed in the VIRTUAL SERVERS panel can be configured on subsequent screens or
subsections.
To add a service, click the ADD button. To remove a service, select it by clicking the radio button next
to the virtual server and click the DELETE button.
To enable or disable a virtual server in the table click its radio button and click the (DE)ACTIVATE
button.
After adding a virtual server, you can configure it by clicking the radio button to its left and clicking the
EDIT button to display the VIRTUAL SERVER subsection.

4.6.1. The VIRTUAL SERVER Subsection

The VIRTUAL SERVER subsection panel shown in Figure 4.6, "The VIRTUAL SERVERS Subsection"
allows you to configure an individual virtual server. Links to subsections related specifically to this
virtual server are located along the top of the page. But before configuring any of the subsections
related to this virtual server, complete this page and click on the ACCEPT button.
38