Red Hat ENTERPRISE LINUX 5 - CONFIGURATION NFS OVER GFS Configuration Manual page 32

Chapter 8. The Cluster Configuration File
<clusternode name="clusternode5.example.com" nodeid="5"
votes="1">
port="5"/>
</clusternode>
</clusternodes>
<cman/>
<fencedevices>
<fencedevice name="apc1" agent="fence_apc" ipaddr="link-
apc" login="apc"
</fencedevices>
<rm/>
</cluster>
After the cluster resources and service were configured, the cluster.conf file appeared as follows.
<?xml version="1.0"?>
<cluster alias="nfsclust" config_version="10" name="nfsclust">
<fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
<clusternodes>
<clusternode name="clusternode1.example.com" nodeid="1"
votes="1">
port="1"/>
</clusternode>
<clusternode name="clusternode2.example.com" nodeid="2"
votes="1">
port="2"/>
</clusternode>
<clusternode name="clusternode3.example.com" nodeid="3"
votes="1">
22
<fence>
<method name="apc-nfs">
</method>
</fence>
passwd="apc"/>
<fence>
<method name="apc-nfs">
</method>
</fence>
<fence>
<method name="apc-nfs">
</method>
</fence>
<fence>
<method name="apc-nfs">
<device name="apc1" switch="3"
<device name="apc1" switch="3"
<device name="apc1" switch="3"