Advertisement
Quick Links
Advertisement
Related Manuals for DDpai Z40
Summary of Contents for DDpai Z40
- Page 1 User Guide...
-
Page 2: Specifications
1 SPECIFICATIONS · Product Name:Dash Cam · Product Model:Z40 Size:81x61x33mm · Input:5V · Storage:TF card storage, maximum support · 128GB, cycle recording · Wi-Fi: Wi-Fi/2.4GHz · G-Sensor: Built-in 3 Gyro sensor, motion locking, adjustable sensitivity via App · RAM: 2Gb... -
Page 3: Package Contents
2 PACKAGE CONTENTS Dash Cam Power Cable USB Charger Installation Tool User Guide 3M Adhesive Static Sticker Bracket... -
Page 4: Product Overview
3 PRODUCT OVERVIEW 1 Dash Cam Screen 5 MIC 6 TF Card Slot 2 Working Indicator 7 Lens 3 AV Interface 4 Type-C Power Interface... - Page 5 Button Description Function description Click the button to enter the 1 Set settings selection. Click the button to turn 2 Sound Recording on/off recording. Click the button to open the 3 Album album. Click the button to turn on/off the screen. 4 Lock Reset: Long press 6s to reset.
-
Page 6: Led Indicator Instruction
4 LED INDICATOR INSTRUCTION Product status Indicator status Working fine Blue light is always on Incident video/emergency Purple light flashs quickly video/photo video Red light flashs quickly Abnormal status/upgrading Green light is always on USB data transmission mode Test pattern White light is always on Parking monitoring Red light is always on... -
Page 7: Installation
5 INSTALLATION 1.Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion. 2.Open the protection cover of TF card slot, insert the memory card into the slot, pay attention to the front and back sides, and close the protection cover after completion. - Page 8 Ideal mount area Tuck in cable 4.Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable. 5.After the car starts, the Dash Cam powers up and starts recording.
-
Page 9: App Instruction
Cam network automatically. For iOS phone: turn on WLAN from “Settings ->WLAN”). The Dash Cam’s default SSID (or Wi-Fi name) is DDPAI_Z40_XXXX. 4.Enter the password (the default password is ‘1234567890’). 5.Enter DDPAI App, wait a few seconds until the preview screen show. - Page 10 Preview 1.Open the DDPAI App, and add your Dash Cam. 2.Select “Device > Entering” tab, this will bring you to the preview page. < < Capture Capture Emergency Emergency Now&back Now&back Entering Device On The Road Rotate your smart phone or press expand icon, turn the preview screen to landscape mode.
- Page 11 Playback Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, now you can watch the history recording.
- Page 12 Download Video Files 1.Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
- Page 13 CONTACT www.ddpai.com feedback@ddpai.com DDPAI Technology Co., Ltd Floor 12, Yihua finance building, Software Park, Yuehai Sub district, Nanshan district, Shenzhen...
- Page 14 For more information and FAQs, Please scan the QR code:...
Need help?
Do you have a question about the Z40 and is the answer not in the manual?
Questions and answers