DDpai N5 Series Manual

SPECIFICATIONS

Product Name: Dash Cam
Model: N5, N5 Dual, N5 Pro, N5 Ultra, N5 Plus
Input: 5V 2A
Resoluon: 3840 X 2160
Dimensions: 102 x 21.9 x 36mm
Memory Card: SD card U3 and above

PACKAGE CONTENTS

Note: Some models do not include the oponal accessories shown above, please refer to the actual product received.

PRODUCT OVERVIEW

1. Lens
2. USB Type-C Port
3. Indicator
4. Rear Camera Port
5. MIC
6. Speaker
7. Function Button
8. Memory Card Slot
9. Mounting Bracket

INDICATOR GUIDE

INSTALLATION

1. Clean your windshield and aach the electrostac scker to the recommended area as shown in the figure below. Make sure you remove air bubbles between the scker and the glass.
2. Take out the Dash Cam, tear off the 3M adhesive protecve film aached to the mounng bracket, and sck the adhesive surface to the windshield. Ensure the installaon posion is behind the rearview mirror and does not interfere with the driver's vision, as shown in the figure below.
3. Use the power cable to connect the dash cam to the cigaree lighter socket. Use the car wire trim tool to run the power cable along the front windshield and the roof, and hide the cable inside the Pillar A.
   Note: Radar module is not included in the package, please purchase separately if needed. The figure above is for reference only.
   
4. Peel off the lens protecve film and start the vehicle, you will hear the Dash Cam's power-on tone, and the indicator on the device will stay green.
5. Connect the Dash Cam to the DDPAI App, refer to the reference line displayed on the preview interface, and rotate the bracket to adjust the camera angle. For more installaon details, please scan the QR code below to watch the Installaon video.
   
   For more parking monitoring funcons, contact your local dealer or purchase the hardwire kit and radar module on online plaorms. Scan the QR code below to watch the installaon video.
   
6. Connect the oponal rear camera to the Dash Cam. Please refer to the figure below for the specific wiring location.
   Note: Please purchase the rear camera separately or purchase a package that includes the rear camera.
   

APP INSTRUCTION

Install DDPAI APP

Scan the QR code below or search for "DDPai" in Google Play Store (Android) or App Store (iOS) to download the DDPAI App.

Connect N5 Dual with Smart Phone

1. Keep the Dash Cam and mobile phone within 2.5 meters.
2. Launch the DDPAI App, enter the "Device" interface and tap "+ Connect New Device". Then tap "Screen-less Dash Cam".
3. Tap "Next" > "Connect to Wi-Fi" in turn, and the detected Wi-Fi of the Dash Cam (such as DDPAI_N5 Dual_XXXX) will be displayed.
4. For iPhone: When you enter the "Sengs" interface, select "WLAN" > "DDPAI_N5 Dual_XXXX", enter the inial password (1234567890), and tap "Join". For Android phones: In the Wi-Fi list, select "DDPAI_N5 Dual_XXXX", enter the inial password(1234567890), and tap "Connecon".

Preview
Once the Dash Cam is successfully connected to the DDPAI App, you can preview footage from the front camera and rear camera.
Landscape mode: Tap or rotate your phone horizontally.
View footage from the rear camera: Tap to switch the camera.

Playback
Drag the meline forward or backward in the monitoring screen to view the video at a specific me. Wait for approximately 5 seconds, or you can directly tap the thumbnail to start playing the previously recorded video.

Download Video Files

1. Drag the timeline forward or backward in the monitoring screen to select the starting point of the recording you wish to download.
2. Then tap to enter the download interface.

CONTACT
www.ddpai.com
feedback@ddpai.com
DDPAI Technology Co., Ltd