Related Manuals for ATA GDO-12 HiRo
Summary of Contents for ATA GDO-12 HiRo
- Page 1 GDO-12 High Rolling Door Opener Quick Operation Guide 1.0 User Operating Controls Button Function Close Stop / Set Button Open Mode P/N# 87806 DOC# 160441_01...
-
Page 2: Manual Door Operation
2.0 Manual Door Operation IN THE EVENT THE DOOR BECOMES OBSTRUCTED DETACH DOOR FROM OPENER AS FOLLOWS: 1. TO DISENGAGE: PULL HANDLE DOWN PULL & RELEASE HANDLE 2. TO RE-ENGAGE: REPEAT ACTION 2.1 To Disengage the Opener: 1. It is recommended to do so with the door in the closed position. - Page 3 3.0 Coding a Remote Control 3.1 Storing the Remote Control Code: The GDO-12 HiRo can store up to sixty four (64) transmitters in its memory. 1. Press the MODE button to highlight the CODE LED. 2. Press OPEN or CLOSE buton until BLUE CLOSE, RED STOP/SET and GREEN OPEN LEDs are on.
- Page 4 4. Locate the registration card for the opener. 5. Go to phone settings, then WiFi and select (ATA000000). 6. Open App and tap on Start. 7. Select setup a new Smart Hub. 8. Follow on screen instruction in the ATA App. 9. Upon completion, test opener operation through the ATA App.
-
Page 5: Troubleshooting
5.0 Troubleshooting Symptom Possible cause Remedy The opener does The opener does not have Plug a device of similar voltage (e.g. not work from power a hairdryer) into the power point and the remote check that it is OK Replace the battery The battery in the remote control is flat The remote button is not... - Page 6 (their contact details are usually on a sticker on the back of your garage door). Scan: for installation manual For product assistance, general enquiry or more information, please visit: ata-aust.com.au or call 1300 133 944.
Need help?
Do you have a question about the GDO-12 HiRo and is the answer not in the manual?
Questions and answers