Specifying Silent Installation Directives - Red Hat DIRECTORY SERVER 7.1 Installation Manual

Chapter 4. Silent Installation and Instance Creation
Components= slapd,slapd-client
[admin]
SysUser= root
Port= 33646
ServerIpAddress= 111.11.11.11
ServerAdminID= admin
ServerAdminPwd= admin
Components= admin,admin-client
[base]
Components= base,base-client,base-jre
[nsperl]
Components= nsperl561
[perldap]
Components= perldap14
4.1.2.3. Sample File for Installing the Standalone Red Hat Console
The following is an example of the install.inf file that is generated when you install just Red Hat
Console:
[General]
FullMachineName= dir.example.com
ConfigDirectoryLdapURL= ldap://dir.example.com:389/o=NetscapeRoot
SuiteSpotUserID= nobody
SuiteSpotGroup= nobody
ConfigDirectoryAdminID= admin
ConfigDirectoryAdminPwd= admin
ServerRoot= /opt/redhat-ds/servers
Components= svrcore,base,slapd,admin
[base]
Components= base-client
[slapd]
Components= slapd-client
[admin]
Components= admin-client,base-jre

4.1.3. Specifying Silent Installation Directives

This section describes the basic format of the file used for silent installation. It then describes the
directives that are available for each area of the silent installation file.
Section 4.1.3.1 Silent Installation File Format
•
Section 4.1.3.2
• [General]
Section 4.1.3.3
• [slapd]
Section 4.1.3.4 [admin] Installation Directives
•
Section 4.1.3.5 [Base] Installation Directive
•
Installation Directives
Installation Directives
35