Red Hat CERTIFICATE SYSTEM 8 Install Manual page 86

Hide thumbs Also See for CERTIFICATE SYSTEM 8:
Table of Contents

Advertisement

Chapter 5. Creating Additional Subsystem Instances
TIP
To get full usage examples and syntax for the pkicreate command, run pkicreate --
help.
Parameter
pki_instance_root
subsystem_type
pki_instance_name
1
secure_port
1
agent_secure_port
1
ee_secure_port
ee_secure_client_auth_port
1
admin_secure_port
non_clientauth_secure_port
1
unsecure_port
76
1
1
Description
Gives the full path to the new instance
configuration directory.
Gives the type of subsystem being created.
Gives the name of the new instance. Instance
names must be unique on a single machine,
but do not have to be unique within the security
domain (since instances are identified by
hostname and port, not instance name).
Sets a single SSL port number for the
subsystem. This parameter is required if
port separation is not configured, meaning
that separate ports are not assigned for the
administrator, agent, and end-entities services.
Sets the SSL port for the agent web services. If
this is specified, then both ee_secure_port
and admin_secure_port must be
specified. For CAs only, an end-entities client
authentication port is also required with the
ee_secure_client_auth_port option.
Sets the SSL port for the end-entities
web services. If this is specified, then
both agent_secure_port and
admin_secure_port must be specified.
For CAs only, an end-entities client
authentication port is also required with the
ee_secure_client_auth_port option.
For CAs only. Sets the SSL port for the end-
entity client authentication. If this is specified,
then ee_secure_port, agent_secure_port,
and admin_secure_port must be specified.
Sets the SSL port number for the administrator
services, usually the pkiconsole. If this is
specified, then both agent_secure_port
and ee_secure_port must be specified.
For CAs only, an end-entities client
authentication port is also required with the
ee_secure_client_auth_port option.
Sets the end entities SSL port for RA and TPS
subsystems.
Sets the regular port number. If this is not set,
the number is randomly generated. Still, it is

Advertisement

Table of Contents
loading

This manual is also suitable for:

System 8 - install guide 25-03-2010

Table of Contents