Default Ca Instance Information - Red Hat CERTIFICATE SYSTEM 8 Install Manual

When the Certificate System is first installed, one instance for each subsystem type is also installed.
The default information such as the port numbers, instance name, and configuration file location for
each subsystem (after being installed and going through the setup process) is listed in the following
sections.

9.5.1. Default CA Instance Information

The default CA configuration is listed in
values are unique to the default instance; the default certificates and some other settings are true for
every CA instance.
Setting
Standard Port
Agents Port
End Users Port
End-Entites Client Authentication Port
Admin Port
Tomcat Port
Instance Name
Main Directory
Configuration Directory
Configuration File
Subsystem Certificates
Security Databases
Log Files
Install Logs
Process File
Profile Files
Email Notification Templates
Web Services Files
The subsystem certificate is always issued by the security domain so that domain-level operations that require client
authentication are based on this subsystem certificate.
Table 9.3. Default CA Instance Information
Table 9.3, "Default CA Instance
Value
9180
9443
9444
9446
9445
9701
pki-ca
/var/lib/pki-ca
/etc/pki-ca
/etc/pki-ca/CS.cfg
/etc/pki-ca/password.conf
CA signing certificate
OCSP signing certificate (for the CA's internal
OCSP service)
SSL server certificate
Audit log signing certificate
Subsystem certificate
/var/lib/pki-ca/alias
/var/log/pki-ca
/var/log/pki-ca-install.log
/var/run/pki-ca.pid
/var/lib/pki-ca/profiles/ca
/var/lib/pki-ca/emails
/var/lib/pki-ca/webapps - Agent services
/var/lib/pki-ca/webapps.admin - Admin services
/var/lib/pki-ca/webapps.ee - End user services
Default CA Instance Information
Information". Most of these
1
115