Red Hat CERTIFICATE SYSTEM 8 Install Manual page 36

Chapter 3. Installation and Configuration
NOTE
yum is used only for the first subsystem instance; any additional subsystem instances are
added using pkicreate.
subsystem can be any of the Certificate System subsystems:
• ca for the Certificate Manager.
• ra for the Registration Authority.
• kra for the Data Recovery Manager.
• ocsp for the Online Certificate Status Protocol Responder.
• tks for the Token Key System.
• tps for the Token Processing System.
• console for the Java console.
Once the packages are installed, then the installer automatically launches the pkicreate script to
create the default subsystem instance automatically. A URL to access the new instance is printed
to the screen which gives the subsystem instances hostname, port, and a login PIN to access the
configuration wizard.
PKI instance creation Utility ...
PKI instance creation completed ...
Starting instance_name:
instance_name (pid 17990) is running ...
'instance_name' must still be CONFIGURED!
(see /var/log/instance_name-install.log)
Before proceeding with the configuration, make sure
the firewall settings of this machine permit proper
access to this subsystem.
Please start the configuration by accessing:
https://hostname.domainname:admin-port/subsystem_type/admin/console/config/login?pin=pin
After configuration, the server can be operated by the command:
/sbin/service instance_name start | stop | restart
To install the pkiconsole to administer the subsystems, run the following:
yum install pki-console
26
[ OK ]