Home Cinema 880/1080
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: These illustrations show the Home Cinema 1080, but the instructions are
the same for the Home Cinema 880 unless otherwise noted.
Contents
Make sure your projector box includes all of these parts:
Connect the projector
Video device
Home Cinema 880
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your video device.
Audio Out
Home Cinema 1080
Connect multiple video devices and use the Source Search button on the
projector or the remote control to switch between them.
Computer
L
R
Video
Audio Out
Computer
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Note: For more information on connecting the projector to your computer or
other devices (camera, USB flash drive, etc.), see the online User's Guide.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable. If you
connected a composite video cable to the Home Cinema 1080, connect one end
of an RCA audio cable to the projector's audio input ports and the other end to
your video device's audio output ports.
Computer
L
R
Video
Audio Out
HDMI
HDMI 1
HDMI 2
HDMI 1
HDMI 2
HDMI cable
HDMI cable
RCA video cable
(composite video)
RCA audio cable
Need help?
Do you have a question about the Home Cinema 880 and is the answer not in the manual?
Questions and answers