Table of Contents
Advertisement
Quick Links
Operating instructions
Safety-monitoring module
Operating instructions pages 1 to 6
EN
Translation of the original operating instructions
Content
1
About this document
11 Function 1
12 Target group: authorised qualiied personnel 1
13 Explanation of the symbols used 1
14 Appropriate use 1
15 General safety instructions 1
16 Warning about misuse 1
2
25 Safety classiication 2
3
32 Dimensions 2
4
5
6
62 Maintenance 3
7
71 Disassembly 3
72 Disposal 3
8
9
91 Declaration of conformity 5
1. About this document
1.1 Function
for the mounting, set-up and commissioning for the safe operation and
disassembly of the safety-monitoring module The operating instructions
must be available in a legible condition and a complete version in the
vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operat-
ing instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
1.4 Appropriate use
The products described in these operating instructions are developed to
execute safety-related functions as part of an entire plant or machine It
is the responsibility of the manufacturer of a machine or plant to ensure
the correct functionality of the entire machinery or plant
The safety-monitoring module must be exclusively used in accordance
with the versions listed below or for the applications authorised by the
manufacturer Detailed information regarding the range of applications
can be found in the chapter "Product description"
1.5 General safety instructions
The user must observe the safety instructions in this operating
instructions manual, the country-specific installation standards as well
as all prevailing safety regulations and accident prevention rules
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet:
wwwschmersalnet
The information contained in this operating instructions manual is
provided without liability and is subject to technical modifications
The entire concept of the control system, in which the
safety component is integrated, must be validated to
EN ISO 13849-2
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed
1.6 Warning about misuse
In case of inadequate or improper use or manipulations
of the safety-monitoring module, personal hazards or
damages to machinery or plant components cannot be
excludedThe relevant requirements of the standard
EN 1088 must be observed
EN
AES 1135-2185
AES 1136-2185
1
Advertisement
Table of Contents
Related Manuals for schmersal AES 1135-2185
Summary of Contents for schmersal AES 1135-2185
-
Page 1: Table Of Contents
31 General mounting instructions 2 Further technical information can be found in the Schmersal... -
Page 2: 17 Exclusion Of Liability 2
Automatic or start button Mounting: snaps onto standard DIN rails to EN 60715 Feedback circuit available: Start-up test: AES 1135-2185: no 3.2 Dimensions AES 1136-2185: yes Device dimensions (H/W/D): 100 x 225 x 121 mm Pull-in delay for automatic start:... -
Page 3: Operating Principle And Settings
Operating instructions AES 1135-2185 Safety-monitoring module AES 1136-2185 5. Operating principle and settings 7. Disassembly and disposal Operating principle after the operating voltage is switched on 7.1 Disassembly 1 The function of the safety-monitoring module is tested The safety monitoring module must be disassembled in the... -
Page 4: 82 Integral System Diagnostics (Isd) 4
Operating instructions AES 1135-2185 Safety-monitoring module AES 1136-2185 8.2 Integral System Diagnostics (ISD) The LED indication of the safety-monitoring modules shows the dif- ferent switching conditions and errors The switching conditions are explained in the following tables Tables switching condition indication... -
Page 5: Declaration Of Conformity
Alboinstraße 56 Appendix X, 2006/42/EC: 12103 Berlin ID n°: 0035 Place and date of issue: Wuppertal, January 31, 2011 Authorised signature Heinz Schmersal Managing Director The currently valid declaration of conformity can be downloaded from the internet at wwwschmersalnet... - Page 6 K. A. Schmersal GmbH Industrielle Sicherheitsschaltsysteme Möddinghofe 30, D - 42279 Wuppertal Postfach 24 02 63, D - 42232 Wuppertal Telefon +49 - (0)2 02 - 64 74 - 0 Telefax +49 - (0)2 02 - 64 74 - 1 00...
Need help?
Do you have a question about the AES 1135-2185 and is the answer not in the manual?
Questions and answers