Page 3
10) This appliance is intended to be used in household and similar applications such as – staff kitchen areas in shops, offices and other working environments; – farm houses and by clients in hotels, motels and other residential type environments; –...
2. INSTALLATION 2.1 Location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption.
Page 5
3) Cap the screw caps on the handle screws. 5) Remove the screws and take the handles down. 4) Take out the screw caps from the handle screw holes. 6) Cap the screw caps on the door handle holes again.
Page 7
3) Take off the door of refrigerating 7) Assemble the door of freezer chamber on chamber. the lower hinge. 4) Take off middle hinge with a screw driver. 8) Assemble middle hinge assembly to left side of the cabinet . 5) Take off the door of freezing chamber.
◆ To prevent cold air escaping from the unit, try to limit the number of times you open the door. We recommend that you only open the door when you need to put food in or take food out. Change the Light Bulb Lamp replacement by professionals 5.
6.5 Do not shield positions of air outlet and return air inlet of the refrigerator 6.6 Do not keep foods of higher temperature close to temperature sensor 6.7Take out drawer of freezing chamber of refrigerator and put foods directly on the glass partition 7.
Page 15
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance). In normal temperature conditions, please arrange the thermostat at the middle setting. Before loading the appliance with packages of fresh food, make sure they are cooled to ambient temperature.
Need help?
Do you have a question about the FF308 and is the answer not in the manual?
Questions and answers