TROUBLESHOOTING
PROBLEM: Display shows R2 error.
• Turn unit power on.
• Warning communicated "loss of link" between control
panel and rear antenna (RADAR 2); occurs only if rear
antenna has been installed.
• Check antenna connection at back of control panel.
• Contact factory, if you suspect antenna is defective.
• Look for cuts in the cable
If difficulties occur which cannot be solved by information in
this Troubleshooting Guide, please call Whistler Customer
Service at 1-800-531-0004 or visit our FAQ page at
www.whistlergroup.com, before returning your unit for service.
For warranty information, refer to owner's manual.
DE
19