Page 1
Suits all INSTRUCTION BOOKLET KCE180 & KCE480 models...
Page 2
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 2738 45 (New Zealand). Alternatively, visit us on our website at...
Care, Cleaning and Storage Troubleshooting Guide Limited Product Warranty Kambrook’s warranty for this product covers the repair or replacement if it’s found to be defective due to faulty materials, workmanship, or function within the warranty period. All legal warranty rights under applicable national legislation will be respected and will not be impaired by our warranty.
IMPORTANT: PLEASE RETAIN YOUR INSTRUCTION BOOK FOR FUTURE USE. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer, can confidently use and trust our products. We ask that any electrical...
Page 5
Return the ceramic the base. In the event that the heater to your nearest Kambrook switch is activated, such as if the service centre for examination, heater is knocked over or picked electrical or mechanical up, operation will cease.
Kambrook or an • Children should be supervised to authorized service agent for ensure that they do not play with inspection or repair.
Page 7
WARNING • The installation of a residual current device (safety switch) (For model KCE480 only) is recommended to provide Do not use the remote control if additional safety protection the battery compartment does not when using electrical appliances. close securely. It is advisable that a safety switch with a rated residual operating Remove the button battery...
Page 8
KCE180 Components 1. Control Panel 5. Oscillating Base 2. LED Display Screen 6. Handle 3. Front Grille 7 . Back Fan Grille 4. Heater Housing 8. Power Cord...
Page 9
KCE480 Components 1. Control Panel 6. Handle 2. LED Display Screen 7 . Removable Dust Filter 3. Front Grille 8. Power Cord 4. Heater Housing Not Shown 5. Oscillating Base • Back Fan Grille • Remote Control...
Controls for KCE180 & KCE480 CONTROL PANEL BUTTONS 1. Power (On/Off) 2. Mode 3. Timer 4. Oscillation 5. Minus 6. Plus LED DISPLAY SCREEN FUNCTION ICONS 1. Room Temperature 2. High Heat 3. Low Heat 4. Fan Only 5. Smart Eco 6.
Page 11
Using Your Kambrook Ceramic Heater SAFETY FEATURES Before First Use Before using your Kambrook ceramic Safety Tip-Over Cut-Out Switch heater for the first time, remove all This heater is designed with a tip-over packaging material and promotional switch fitted to the base of the heater.
Page 12
Using Your Kambrook Ceramic Heater 5. To return to standby at any time during operation, touch the NOTE POWER button. The current temperature display A 30 second cool down timer is an indication of the room will begin counting down on the...
Page 13
Using Your Kambrook Ceramic Heater • The unit will stop heating once the Setting the Temperature set temperature is reached and • Setting the temperature can be return to standby mode. used to maintain your desired room • Once the room temperature falls temperature.
Page 14
Using Your Kambrook Ceramic Heater Setting the Auto-off Timer Oscillation The ceramic heater comes with a 12- Setting the Oscillation hour auto-off Timer that can be set in • 60-degree side to side oscillation 1-hour intervals. can be activated in any mode.
Page 15
Using Your Kambrook Ceramic Heater Using the Remote Control A remote control is included with the KCE480 Ceramic Tower Heater only. The remote control buttons operate in the same way as those on the heater control panel. The remote control includes 1 x CR2025 3V Lithium battery.
Page 16
Using Your Kambrook Ceramic Heater Hints & Tips • Don’t overheat your home. The temperature of a heated room in winter should be 18–21°C. • Your heater will work more efficiently if you stick to Kambrook’s recommended clearance spaces. • Zone off unoccupied rooms by closing doors and only heat the main living areas.
Do not operate the heater in this condition. Cleaning the Filter • Your Kambrook Ceramic Tower Heater (KCE480) comes with a mesh dust filter located at the rear of the heater to help keep dust and debris away from the working parts.
Troubleshooting POSSIBLE PROBLEM POSSIBLE REASON EASY SOLUTION Insert the plug into a 230V or 240V The heater is not plugged in. power outlet and turn the power on. Power button was not pressed after The heater does not Press power button. being plugged in.
Page 20
0800 273 845 www.kambrook.co.nz Kambrook and the Kambrook logo are trademarks of Breville Pty. Ltd. Breville's products are distributed in New Zealand under license. A.B.N. 98 000 092 928. All other brand names may be trademarks of their respective owners. Made in China to our specifications. Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustration in this book.
Need help?
Do you have a question about the KCE180 and is the answer not in the manual?
Questions and answers