Advertisement
Configuring DNS Forwarding
Figure 2-31 Advanced TCP/IP Settings Window with Added TCP/IP Address
To close the Advanced TCP/IP Settings window, click OK.
Step 8
To close the Internet Protocol (TCP/IP) Properties window, click OK.
Step 9
To close the AtNatMP Properties window, click OK.
Step 10
Close the Network and Dialup Connections window.
Step 11
Configuring DNS Forwarding
This section describes how to configure DNS forwarding if you did not configure your server by using
the Setup Wizard. If you used the Setup Wizard, it configured DNS forwarding automatically.
The Domain Name System (DNS) forwarding feature is enabled on BBSM Hotspot to allow DNS
requests to be relayed to a remote DNS server. BBSM Hotspot is not configured as a DNS server; it acts
as a DNS forwarder for its clients and its own DNS requests. These DNS requests, such as
www.cisco.com, are resolved into IP addresses so the Internet routers can locate the web server with the
content.
You must obtain the IP address for your DNS servers from your ISP before you can perform the
Note
following procedure. Refer to the BBSM Hotspot Configuration Requirements Checklist.
Cisco BBSM Hotspot 1.0 User Guide
2-30
Chapter 2
Setting Up BBSM Hotspot
78-15293-01
Advertisement
