Advertisement
Chapter 2
Setting Up BBSM Hotspot
Table 2-7
Button
Connecting a Client to BBSM Hotspot
To connect a client to BBSM Hotspot, the client should meet minimum requirements. This section
provides those requirements and tells how an end user connects to the BBSM Hotspot server.
shows the operating system and browser versions that have been tested and are supported for the BBSM
Hotspot software release 1.0.
Table 2-8
Component
Operating system
Browser
Colors, depth
Screen Area, pixels
Note that the Setup Wizard sets all ports to the FreeAccess web page the first time the wizard is run. You
can change the Start page by using the Custom Web Page Wizard or the Port Settings option in Hotspot
Configuration.
Wizard, refer to the
78-15293-01
Navigation Button Descriptions
Description
Returns the user to the first record or page.
Returns the user to the previous record or page.
Takes the user to the next record or page.
Takes the user to the last record or page.
Minimum End-User Client Connection Requirements
Tested and Supported for BBSM Hotspot 1.0
Windows 98, 2000 Professional, and XP Professional
Linux Red Hat 7.1
Macintosh OS9.0 and OS10.0
Internet Explorer 5.0 or higher
Netscape Navigator 4.7x or higher
256 (65,000 recommended)
800 by 600—For Compaq H3635 and H3760 iPAQ pocket PCs: 240 by 320
limitation.
Figure 2-21
shows the FreeAccess Start page. (For instructions on how to use the Setup
"Running the Setup Wizard" section on page
Connecting a Client to BBSM Hotspot
2-2.)
Cisco BBSM Hotspot 1.0 User Guide
Table 2-8
2-21
Advertisement
